Use the Virtualization tab
The Virtualization tab is part of the Technical View in Tosca Commander.
To open it, select a Module, navigate to the Technical View and click on Virtualization.
The Virtualization tab
The Virtualization tab offers the following options:
Option |
Description |
---|---|
Transport |
Define information that is relevant for the transport of messages, such as HTTP headers. The type of transport depends on the service port used in the message. |
Direction |
Define the direction of a message:
By default, the direction is In for request messages and Out for response messages. |
Specify the service port which should send or receive the message. The name specified here must be same as the one specified in the OSV Monitor. |
|
Counter |
Define how often a message is used within a Scenario. You can set Counter instead of re-using the same Module several times.
|
Verification |
Specify the verification mode of the message structure.
|
Specify the weight of a message. If the message could be assigned to several Scenarios, the system assigns it to the Scenario with the highest weight. The DefaultValue is 0. |
|
Specify the delay for outbound messages. You can enter a positive integer to indicate a delay in seconds, e.g. 4. Alternatively, you can enter absolute values:
To delay a response message by milliseconds, you can add time to your response time (see chapter "Increase response time"). |